Installation
Figure 14.
A.Rod Guide
B.Push Bar
C.Spring Clip
NOTE: Two lift rods are packaged with the Broadmoor/LT/1600/2600 & Landlord/GT/1700/2700 hitch assembly. Use the correct lift rod for manual or electric lift as shown in Figure 2.
7.Assemble lift rod per Figure 2 or 3.
8.See Figure 14. Insert prong of rod guide (A) through hole in upright of push bar (B), and secure with spring clip (C).
9.Electric Lift Units: See Figure 15. If your tractor is equipped with an electric lift, install the lift lever extension assembly (D) to the lift arm (A) as shown. Secure with clevis pin (F) and spring clip
(G) provided.
10.Manual Lift Lever Units: See Figure 16. Connect rear of lift rod (A) to manual lift lever (B), and secure with spring clip (C).
11.Perform Lift Rod Adjustment, page 14.
Viewed from Right Side of Tractor
Figure 15. Electric Lift Bracket
A. Lift Arm | E. Front Attachment |
B. Clevis Pin | Lift Rod |
C. Safety Clip | F. Clevis Pin |
D. Lift Lever | G. Spring Clip |
Extension Assy. | H. Rear Attachment |
| Lift Rod (Optional) |
CB
A
Figure 16. Installing Lift Rod to Manual Lift Lever
A. Lift RodC. Spring Clip B. Manual Lift Lever
12
