Simplicity 1692243, 1692244 manual Safe Maintenance and Storage

8.Never attempt to make any adjustments while the engine is running (except when specifically recom- mended by manufacturer).

9.Let engine (motor) and machine adjust to outdoor temperatures before starting to clear snow.

10.Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Il. Cross gravel driveways, sidewalks, or roads with extreme caution. Loose sand and rocks may be picked up and thrown. Before operating, adjust height of skid shoes (if equipped) to clear gravel or crushed rock surfaces.

12.If discharge chute becomes clogged, stop tractor, disengage power take-off (PTO) by pulling PTO switch downward, shut off engine, remove key and after all moving parts have stopped, clean out dis- charge chute.

13.Never direct discharge chute toward people, espe- cially children, pets, or breakable objects (windows, shrubs, vehicles, etc.) or allow anyone in front of unit.

14.While snowthrower is in motion, keep hands, face, hair, clothing, etc. away from all moving parts (auger, discharge fan, discharge chute, PTD shaft).

15.After striking a foreign object,‘stop the engine, remove the wire from the spark plug, thoroughly inspect the snowthrower for any damage, and repair the damage before restarting and operating the snow thrower.

16.If the unit should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble.

17.Stop the engine whenever you leave the operating position, before unclogging the collector/impeller housing or discharge guide, and when making any repairs, adjustments, or inspections.

18.Take all possible precautions when leaving the machines unattended. Disengage the power takeoff, lower the attachment, set the parking brake, stop the engine, and remove the key.

19.When cleaning, repairing, or inspecting, make certain the collector/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent accidental starting.

20.Do not run the engine indoors, except when starting the engine and for transporting the snowthrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

21.Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes.

Do not attempt to clear steep slopes.

22.Never operate the snowthrower without proper guards, plates, or other safety protective devices in place.

23.Never operate the snowthrower near glass enclo- sures, automobiles, window wells, drop-offs, and the like without proper adjustment of the snow discharge angle. Keep children and pets away.

24.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

25.Never operate the machine at high transport speeds on slippery surfaces. Use care when backing.

26.Never direct discharge at bystanders or allow anyone in front of the unit.

27.Disengage power to the collector/impeller when the snowthrower is transported or not in use.

28.Use only attachments and accessories approved by the manufacturer of the snowthrower (such as wheel weights, counterweights, cabs, and the like).

29.Never operate the snowthrower without good visibility or light.

Safe Maintenance and Storage

1.Check shear bolts, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the tractor with fuel in the fuel tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

3.Always refer to Operator’s Manual for important details if the snowthrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after blowing snow to prevent freeze-up of the collector/impeller.

Safely Transporting the Snowthrower

1.Always use a heavy-duty trailer to transport equip- ment, whether or not attachment system is mounted to tractor.

2.Be sure trailer has all necessary lights and signs required by local, state, provincial or federal laws.

3.Make sure all equipment is securely fastened to trailer with straps, chains, cables, etc.

3