DEPTH REGULATOR LEVER
Tilling depth is controlled by the height of the depth regualtor lever.
To adjust tilling depth.
1.Remove detent pin.
2.Raise the depth regulator lever to position tines at chosen tilling depth.
3.Align hole in depth regulator lever with hole in depth regulator bracket and replace detent pin.
detent pin | depth regulator lever |
|
depth regulator bracket
Adjustments
CAUTION
Always set the depth regulator lever in the transport position before starting engine, that is, place the detent pin in the highest hole of the depth regulator lever.
CAUTION
Do not adjust tilling depth unless drive safety control levers are released to neutral position.
Depth Regulator Lever Down = Shallower tilling. Place the detent pin in the top hole of the depth regulator lever for shallowest tilling.
Depth Regulator Lever Up = Deeper tilling. Place the detent pin in the bottom hole of the depth regulator lever for deepest tilling.
Page 11
