Figure 4
L
Route Deflector Cable & Clip (if included)
NOTE: If the chute rotation is slow or binding, loosen the chute rotation screws (L, Figure 4) 1/4 turn.
Install the Discharge Chute
Figure 6
NOTE: Some models have the discharge chute already | ||||
installed. |
| Reproduction | ||
|
|
| ||
1. | Place discharge chute (M, Figure 5) over tabs chute | |||
| ring (N) as shown. |
|
|
|
2. | Secure discharge chute with three carriage bolts (O) and | |||
| nuts (P). |
|
|
|
| M |
|
| Figure 7 |
|
| O |
| |
| P |
| P | |
|
|
| ||
|
|
|
| |
| P |
|
| N |
Figure 5 |
|
|
| |
3. | Tighten hardware to 66 |
| ||
4. | Connect the wire harness (electric chute models only). |
NOTE: Check all bolts and nuts in flange for tightness. Do not overtighten.