CHECK OIL LEVEL
Remove oil dipstick (Q, Figure 8). Check oil level. Oil level should be between FULL and ADD marks. Add oil if required (See Operator’s Manual). Reinstall oil dipstick.
FULL
Q
Figure 8
Check the Tires
Check tires for damage. Check the air pressure in the tires with an accurate gauge. See the sidewallReproductionof the tire for the proper inflation.
WARNING: Avoid Injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly.
• Do not attempt to mount a tire without the p per equipment and experience to perform the j b.
• Do not inflate the tires above the recommended pressure.
• Do not weld or heat a wheel and ire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or defo m the wheel.
• Do not stand in front or over the tire ass mbly wh inflating. Use appropriate tool that allows you to stand to one side.
NOTICE: Check side of tire for maximum tire pressure.
DO NOT exceed maximum.
Remove Snow Thrower from Pallet
1.Remove straps that secure snow thrower to pallet.
2.Remove snow thrower from pallet.
3.Adjust the skid shoes so that the scraper bar has 1/8- 3/16” clearance above the ground.