Simplicity 2000 Series installation instructions A Warning, Assembly, Installation, B. O-Rings

Installation	2000 RPM Rear PTO
Instructions	Mfg.	No. 1692891
	For Legacy / 2000 / 2900 Series Garden Tractors
	This kit equips Legacy/2000/2900 Series tractors
	with a 2000 RPM rear PTO.	I

Grease Front

and Back

Bearing

Grease Zerks

Figure 1. Install O-Rings

A. Mounting Plate Alignment PinsFigure 2. Grease Bearings

B. O-Rings

,A WARNING

Before beginning installation, engage the parking brake, shut the PTO off, turn the ignition off, and remove the key.

ASSEMBLY

1.Install the two o-rings (B, Figure 1) on the mounting plate alignment pins (A)

2.Grease the front and back bearing grease zerks (see Figure 2) .

INSTALLATION

install PTO Box

1.Remove the rear bumper and mounting hardware.

2.Remove the set screw (A, Figure *from the hydro pump shaft and fan assembly.

NOTE: For easier access to the set screw (A, Figure 3), remove the capscrew (B, Figure 3) retaining the fan, and remove the fan.

3.Remove the fan and shaft assembly from the output shaft.

Figure 3. Remove Hydro Fan & Shaft Assembly

A.Setscrew

B.Capscrew

1