Features & Controls
Figure 1. Control Locations
CONTROL FUNCTIONS
The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.
Deck Lift Pedal, Cutting Height Adjustment Pin & Deck Lift Lock Lever
These control the cutting height of the mower deck. Depress the pedal until it locks into the 5” (12,7 cm) position. Place the adjustment pin in the desired cutting height and release the lift lock lever.
Parking Brake
DISENGAGE | Releases the parking brake. |
ENGAGE | Locks the parking brake. |
Pull the parking brake lever back to engage the
parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged.
Choke
Close the choke for cold starting. Open the choke once the engine starts. A warm engine may not require choking. Pull the knob UP to close the choke. Push to knob DOWN to open the choke.
PTO (Power Take Off) Switch
The PTO switch engages and disengages the mower. Pull UP on the switch to engage, and push DOWN to disengage.
10
