Operation

OPERATING SPEED

 

 

 

 

! WARNING

For normal tilling, set the throttle lever to “fast”.

 

 

EXTREME CAUTION MUST BE TAKEN IN SELECT-

SHUTTING DOWN

 

 

ING TILLING DEPTH. IF YOU ATTEMPT TO TILL

To stop the engine at any time, move throttle control to the off position.

TOO DEEPLY FOR SOIL CONDITIONS, THAT IS,
WITH THE DRAG STAKE IN TOO HIGH A POSITION,

To stop wheels and tines at any time, release the drive safety control

LOSS OF CONTROL COULD RESULT.

lever to the neutral position.

 

IF REMOVING MATERIAL FROM THE TINES BY

 

 

 

TILLING

 

HAND, STOP ENGINE AND REMOVE SPARK PLUG

 

 

 

WIRE FIRST.

1. Adjust the depth regulator lever to desired tilling depth.

 

 

 

 

NOTE: Raise depth regulator lever up one hole at a time,

 

 

 

testing tiller operation after each raise. Raising depth regulator

 

 

! DANGER

 

lever too high can result in loss of control of tiller!

 

2. Move the throttle control to fast.

 

ENGINE AND SURROUNDING PARTS BECOME

3. Place the tiller in motion by pushing down on the drive safety control

EXTREMELY HOT DURING NORMAL USE AND WILL
CAUSE SERIOUS BURN INJURIES IF TOUCHED

 

lever--this will engage the tines.

 

BEFORE THE ENGINE HAS COOLED.

 

 

 

ALLOW ENGINE TO COOL COMPLETELY BEFORE

 

 

 

TOUCHING THESE HOT SURFACES.

 

Reproduction

 

 

 

ALWAYS KEEP HANDS AND FEET CLEAR OF

 

 

for

ROTATING MACHINE PARTS.

 

Not

 

 

 

 

 

 

11