Safety Rules & Information
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.
The triangle 
in text signifies important cautions or warnings which must be followed.
GENERAL OPERATION
•Read, understand, and follow all instructions in the manual and on the unit before starting.
•Only allow responsible adults, who are familiar with the instructions, to operate the unit (local regulations can restrict operator age).
•Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown.
•Be sure the area is clear of other people. Stop unit if anyone enters the area.
•Always look down and behind before and while trav- elling in reverse.
•Be aware of the discharge direction and do not point it at anyone. Do not point the discharge at glass enclosures, automobiles, or windows.
•Disengage all clutches (release drive and auger con- trol levers) before starting the engine.
•Never leave a running unit unattended. Always disen- gage the auger and traction controls, stop engine, and remove keys.
•Stop engine before unclogging chute.
•Operate only in daylight or good artificial light.
•Do not operate the unit while under the influence of alcohol or drugs.
•Watch for traffic when operating near or crossing roadways.
•Use extra care when loading or unloading the unit into a trailer or truck.
•Keep in mind the operator is responsible for acci- dents occurring to other people or property.
•Data indicates that operators, age 60 years and above, are involved in a large percentage of power
•All operators should seek and obtain professional and practical instruction.
•Always wear substantial footwear and appropriate winter clothing. Wear
•Before using, always visually check that all hardware is present,
•Never operate the machine with defective guards, or without safety protective devises in place.
•Stop engine before: refuelling, removing an attach- ment, making adjustments (unless the adjustment can be made from the operator’s position).
•Follow the manufacturer’s recommendation for wheel weights or counterweights.
•Adjust skid shoe height to clear gravel or crushed rock surfaces.
•Do not touch snowthrower parts which may be hot from operation. Allow such parts to cool before attempting to service the unit.
SLOPE OPERATION
WARNING
Never operate on slopes greater than 17.6 percent (10°) which is a rise of
When operating on slopes use additional wheel weights or counterweights. See your dealer to determine which weights are available and appropriate for your unit.
Select slow ground speed before driving onto slope. Travel UP and DOWN the slope, never across the face, use caution when changing directions and DO NOT START OR STOP ON SLOPE.
Slopes are a major factor related to
Do
•See your authorized dealer for recommendations counterweights to improve stability.
•Travel up and down slopes, not across.
•Remove obstacles such as rocks, tree limbs, etc.
•Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Snow can hide obstacles.
•Use slow speed. Tires may lose traction on slopes. Choose a low gear so that you will not have to stop or shift while on the slope.
•Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.
•Always keep unit in gear especially when traveling downhill.
Do Not
•Do not start or stop on a slope. If tires lose traction, disengage the auger and proceed slowly straight down the slope.
•Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.
•Do not operate near
•Do not operate on wet surfaces. Reduced traction could cause sliding.
•Do not shift to neutral and coast down hills.
2
