Regular Maintenance
CHECK / LUBRICATE LINKAGE
Check the function of the Hand controls: the controls should function as described in the CONTROLS section. It is critical for the safe operation of the unit that the controls disengage when released.
Lubricate as shown in figure 18.
IMPORTANT NOTE |
|
If the controls do not function properly, lubricate them. | Figure 18. Lubricate Hand Control |
If lubrication does not rectify the problem, see your |
|
dealer. Under no circumstances should the unit be |
|
used if the controls are not functioning properly. |
|
Maintenance
| IMPORTANT NOTE |
|
| C | |
It is very important that grease fittings he auger |
| ||||
|
| ||||
shaft are lubricated regularly. If auger rusts shaf , |
|
| |||
damage to worm gear may occur if shear pins do not | B |
| |||
break. |
|
|
| ||
|
|
|
| ||
LUBRICATING THE AUGER SHAFT |
| A | |||
|
| ||||
& ASSEMBLY | Not |
| B | ||
|
| ||||
1. | Remove cotter pin (C, Figure 19) and shear | in | C |
| |
| (B). |
|
|
| |
2. | Use a grease gun and squirt several shots of |
| A |
| |
| grease into grease fitting (A). |
|
|
| D |
3. | Rotate auger assembly (D) several times to |
|
| ||
|
|
| |||
| distribute the grease evenly. | epeat step 2. |
| D |
|
4. | Reinstall shear pin (B) and cotter pin (C). |
|
|
| |
5. | Repeat procedure for other side.Reproduction |
| |||
|
|
|
| Figure 19. Lubricating the Auger Shaft Assembly | |
|
|
|
| A. Grease Fittings | C. Cotter Pins |
|
|
|
| B. Shear Pins | D. Auger Assembly |
22