Adjustments/Service
|
|
| A |
|
Auger Drive Belt |
|
|
| B |
The drive belts are of special construction and must |
| F |
| |
be replaced with original factory replacement belts |
|
|
| |
available from your nearest authorized service center. |
| L | C | |
Some steps require the assistance of a second |
|
| ||
|
| D | ||
person. If the auger drive belt is damaged, the snow |
|
| ||
|
|
| ||
thrower will not discharge snow. Replace the | K |
| E | |
damaged belt as follows. |
|
|
| |
1. Disconnect the spark plug wire. |
|
|
| |
2. Loosen the capscrews (A, Figure 30) on each side |
|
| A | |
|
|
| ||
of the bottom panel (B). |
| J |
|
|
3. Remove the bottom panel (B). |
|
| G | |
|
| I |
|
|
| A |
|
| H |
A |
|
|
| |
|
|
|
| |
| C | Figu e 31. Pulleys a d Belts |
| |
|
| A. T action Drive Belt |
| |
|
| B. Belt Gu de |
| |
B |
| C. Auger Dr ve Pulley, Engine |
| |
| D. Auger Dr ve Belt |
| ||
|
|
| ||
|
| E. Tra | Drive Spring |
|
|
| F. Tra | Drive Pulley, Engine |
|
Figure 30. Bottom Cover |
| G. Tra | Drive Pulley |
|
A. Capscrews |
| H. Impeller Pulley |
| |
B. Bottom Panel |
| I. Swing Plate Axle Rod |
| |
C. Auger Housing |
| J. |
|
|
|
| K. Auger Idler Pulley |
| |
4. Loosen screw (B, Figure 26) from belt cover (A). | L. Traction Drive Idler Pulley |
| ||
Remove belt cover (A). |
|
|
|
|
5. Loosen the belt guide (B, Figure 31). Pull the belt | 8. Remove the 5/16 flange lock nut (B, Figure 32) | |||
guide away from the auger drive pull y (A). | securing the rotator cover (A). |
| ||
6. Pull the auger idler pulley (K) away from the auger |
|
|
| |
drive belt (D) and slip the belt off of the idler. | B |
| A | |
|
|
| ||
7. Remove the auger drive belt (D) from the engine |
|
|
| |
pulley. To remove the auger drive belt (D), the |
|
|
| |
| Reproduction |
| ||
auger drive pulley (C) may have to be partially |
|
|
| |
rotated. |
|
|
|
|
Figure 32. Rotator Cover Removal
A. Cover
B. Nut, flange, lock
30