Simplicity Specifications, ENGINE:, CHASSIS:, DIMENSIONS, Briggs & Stratton

Specifications

Note: Specifications are correct at time of printing and are subject to change without notice.

* Power Ratings

The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of

Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

ENGINE:			DIMENSIONS
Briggs & Stratton			Effective Clearing Width
			Length	24” (61cm)
Make	Briggs & Stratton			54” (137cm)
Model	Snow Max		Height
Gross Torque	9 @ 3060 rpm			42.5” (108cm)
Displacement		Reproduction
	12.5 Cu. in (205 cc)		Weight	SMI - 180 lbs. (81.64 kg)
Oil Capacity	18-20 oz. (0,54-0,59 L)			SNP - 177 lbs. (80.28 kg)
CHASSIS:
Wheels	Tire Size: 13 x 5
Spout Rotation	Inflation Pressure: 20 psi (1,37 bar)
	200 Degrees
Impeller	10” (30cm) 4 Blade Ribb Flighted Steel
Auger Opening Height	24” (61 cm)
Drive System	Friction Disc, 6 Forward Speeds, 2
Reverse

Specifications

35