4.0Cleaning and Applying Detergent
IMPORTANT: Use detergents designed specifically for pressure washers.
Household detergents could damage pump.
To apply detergent follow these steps:
1.Prepare pressure washer detergent solution as required by manufacturer.
2.Place detergent siphon tube/filter into solution.
3.Make sure “SOAPER” nozzle (Black) is installed.
4.Apply cleaning solution to a dry surface, starting at lower portion of areas to be washed and work upward, using long, overlapping strokes. To prevent streaking, DO NOT allow detergent to dry on.
IMPORTANT: You must flush the injection system after each use by placing siphon hose into a bucket of clean water, then run pressure washer in low pressure (Black nozzle) for 2 minutes.
www.simpsoncleaning.com | page 9 |
