Slip the thread into the center slot next to the take-up lever, then into the center slot in the guides just above the needle clamp. Next slip the thread behind the metal guide and then into the eye of the needle in A position, and then under what looks like a bridge at the back of the foot. Pull the thread tail to the back of the serger.
THREAD TIPS FOR 4-THREAD ULTRA STRETCH SAFETY STITCH
•Be sure to follow the threading sequence outlined above.
•Make sure needles are set-up in positions A and B for the 4-thread Ultra Stretch Safety Stitch. This is very well illustrated in your manual on page 15.
•When inserting the needle in positions A & B, loosening both needle screws A and B will facilitate inserting and removing needles.
•The Brown Chain/Cover Stitch looper is not used for the 4-Thread Ultra Stretch Safety Stitch.
•Always reset the tension dials by re-selecting the stitch after threading the serger.
