THREADING TIPS FOR 5-THREAD SAFETY STITCH:
•Be sure to follow the threading sequence outlined above.
•Make sure needles are set-up in positions D, and B for 5-thread safety stitch. This is very well illustrated in your manual on page 15.
•If you would prefer a wider 5-thread safety stitch, place the overedge needle in the A rather than the B position when threading the blue overedge needle. This will widen the overedge finish on the edge of your fabric.
•When inserting the needle in positions A or B, loosening both screws A and B will facilitate inserting and removing needles.
•Always reset the tension dials by re-selecting the stitch after threading the serger.
