Inserting the Bobbin
When inserting or removing the bobbin, the needle must be fully raised.
1.Insert the bobbin in the bobbin case with the thread running counterclockwise direction (arrow).
2.Pull the thread through the slit (A).
3.Draw the thread clockwise until it slips into the notch (B).
4.Pull out about 15 cm (6 inches) of thread and attach the bobbin cover plate. (C)
Attention:
Turn power switch to off ("O") before inserting or removing
1 |
A |
2 |
the bobbin.
| C |
| B |
3 | 4 |
