JumpSet
To set the Jump button to a specific channel (other than a traffic channel) when pressed, do the following:
1.Use the channel up and down buttons to highlight the “JumpSet” option, and press the Select button.
2.Figure 14 will be displayed.
Jump Setting
Tune to desired Ch.
press & hold the button
Figure 14
3.Use the channel up and down buttons to tune to the channel you want assigned to the Jump button. When the channel is tuned, press and hold the Jump button for 2 seconds until Figure 15 is displayed.
Jump Setting
Traffic: NONE
JumpSet
Figure 15
The channel selected is now assigned to the Jump button.
To exit the Jump Settings menu, press the MENU button.
At any time while listening to a channel (other than a traffic channel), the channel may be as- signed to the Jump button by simply pressing and holding the Jump button for 2 seconds.
[ Menu Options ] 45