Edit Code
This setting allows you to change a previously selected Parental Control code.
The first time the Edit Code setting is accessed you will be prompted to enter a four digit code. (Figure 29) This code can be any four digit number from 0000 to 9999.
Enter Code
# ____
Figure 29
If you should exit this prompt without entering a code, you will be prompted to set a code the next time you enter the Edit Code option.
To change the Parental Control code, do the following:
1.Use the channel up and down buttons to highlight Edit Code, and press the Select button.
2.At the prompt, enter the four digit Parental Control code. (Figure 30)
Enter Code
# ____
Figure 30
3.If you did not enter the correct code, a message will be displayed alerting you that the wrong code was entered, and you will be prompted again to enter the code. (Figure 31)
