WARNING
This symbol means important instructions. Failure to heed them can result in serious injury or death.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANY WAY. Doing so may result in fire, electric shock or product damage.
DO NOT INSERT ANY OBJECTS INTO THE UNIT. Doing so may result in fire, electric shock or product damage.
MAKE THE CORRECT CONNECTIONS. Failure to make proper connections may result in fire or product damage.
DO NOT SPLICE INTO A ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.
DO NOT INSTALL THE UNIT IN AREAS WHERE THERE ARE HIGH LEVELS OF HUMIDITY, MOISTURE OR DUST. Doing so can result in electric shock or product failure.
FCC Warning: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
Note: This equipment has been tested and found to comply with Part 15 of the FCC Rules. These rules are designed to provide reasonable protection against harmful interference. This equipment may
cause harmful interference to radio communications if it is not installed and used in accordance with these instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:
• Relocate the receiving antenna.
• Consult the dealer or an experienced technician for help.
CAUTION
This symbol means important instructions. Failure to heed them can result in injury or material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return the tuner to your authorized retailer or nearest service center for repairing.
INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR SHARP METAL EDGES. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring. If the wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.
USE THE SPECIFIED ACCESSORY PARTS AND INSTALL THE PRODUCT SECURELY. Be sure to use only the specified accessory parts. Use of non- specified parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose, resulting in hazards or
Installation
It is recommended that prior to starting the installation, you read this installation section completely and follow the instructions. In addition, consult the manual of the audio device to which you will be connecting the SCH1C Tuner to determine the required installation configuration:
• If power for the SCH1C Tuner is not provided by your audio device via the DIN cable connection, you will need to use the provided AC Power Adapter to provide power for the SCH1C Tuner.
• If audio input from the SCH1CTuner is not suported via the DIN cable connection of your audio device, you will need to connect the audio output of the SCH1C Tuner to your audio system via the
NORTH
WEST | 1 | 5 |
| ||
|
| |
|
| 2 |
Mounting the SCH1C Tuner
Consider the mounting location carefully to be sure that you avoid the following:
• Any location where the tuner is exposed to moisture.
• Any location where the tuner is exposed to extreme heat.
The tuner may be mounted on a wall with #10 screws, using the slots on the underside of the tuner to hang on the tuner on the screws. Alternately, the tuner may
SCREW
MOUNTING SLOTS
be placed on any flat surface.
SKY
4 EAST
3
HORIZON
product failure.
SCH1C SIRIUS Connect Tuner Installation Guide
SOUTH
SCH1C SIRIUS Connect Tuner Installation Guide
