Sirius Satellite Radio EQ-SIRRCV, EQ-SIRCBL, EQ-SIRANT owner manual Activating the Song S-SeekAlert

Activating the Song (S-Seek) Alert

1.Press and hold the MEMO button for 3 seconds to enter the S-Seek Mode.

2.Press and release SELECT. A pop-up screen displaying two selectable options - “Delete” and “S-Seek” will appear (below left).

3.Use the Channel Switch to highlight the “S-Seek” option.

4.Press and release SELECT and an S-Seek confirmation screen will appear. Select the “Yes” option using the Channel Switch and press SELECT to confirm (below right).

With the S-Seek option enabled, whenever the receiver is turned on, it automatically searches the incoming channels to determine if a match exists with the program information stored in receiver’s memory. If one or more matches are found, a pop-up screen momentarily appears for 2- seconds and displays “S-Seek Alert”. An audible beep tone will be heard indicating that a match has been found. The display then reverts to the S-Seek Alert screen which displays the current matches. You can now select the Artist/Song Title or game that you wish to listen to. No stored match alert is provided for the currently selected channel. To ensure that no duplicate entries are stored in memory, the receiver will check the stored input data to ensure the information about to be stored is not already in memory.

•If one or more matches are found, a list appears. You can scroll through the list and select a program using the Channel Switch. Your selection will be tuned and the display will revert to the last active display mode.

•If a selection is not chosen within 10 seconds, the screen will revert to the last active display and tuning modes.

NOTE: Play of the current selection will continue until a new selection is made.

Menu Display Options

To enter the Menu Options page, press and release the MENU Button. The “Menu Options” list will appear on the display (below). Using the Channel Switch, highlight the option you wish to adjust and press SELECT. The following options are available:

Sirius ID

Signal Indicator

FM Transmitter

Confirm Tone

Brightness Control

Channel Block

Contrast Control

Time Based Features

Auto Select

Factory Default

Note: If a button is not pressed within 10 seconds, the Receiver will exit the “Menu Options” function and revert back to the Default screen display.

Sirius ID

Displays your 12 digit Sirius ID (SID) number. The SID is unique to every Streamer GT Receiver and is required to activate your service. It is recommended that you write this number in the space provided on the last page of this user guide. No adjustments are allowed in this mode. To exit this option, press the SELECT or Menu Button.