FM Transmitter Options
If you would like to use the
1.Use the Channel Switch to highlight “FM Transmitter”. Press SELECT.
2.Use the Channel Switch to select “FM On/Off”. Press SELECT.
3.Use the Channel Switch to select “On”. Press SELECT.
4.Use the Channel Switch to highlight the “Frequency”. Press SELECT.
5.Use the Channel Switch and Category Buttons to adjust the FM frequency. The Channel Switch adjusts in 0.1 MHz increments and the Category Buttons adjust in 1 MHz increments.
Display Settings
It is possible to adjust the Brightness and Contrast of the receiver’s display. While in the “Menu Options” list, use the Channel Switch to highlight the display setting you wish to adjust. Press SELECT to select.
1.Brightness Control: Adjusts the overall intensity of the display to help with viewing in different lighting conditions. Use the Channel Switch to adjust brightness up or down. The bar graph at the bottom of the screen will move to indicate the change.
2.Contrast Control: Adjusts the relationship between the background and the text on the LCD display. Use the Channel Switch to adjust the contrast up or down. The bar graph at the bottom of the screen will move to indicate the change.
To exit the Display settings, push the MENU button
Auto Select
With Auto Select turned OFF, you must press SELECT in order to tune to a highlighted channel in any of the list modes. Turn Auto Select ON if you would like to automatically tune to the highlighted channel without pressing SELECT. This will allow you to quickly listen to all the available programming on a given list. The default is OFF. To change the Auto Select option, perform the following:
1.From the Menu, use the Channel Switch to highlight “Auto Select”. Press SELECT.
2.Use the Channel Switch to Select “ON” or “OFF”. Press SELECT to set the option.
To exit, push the MENU button.
Signal Indicator
1.Use the Channel Switch to highlight “Signal Indicator”. Press SELECT.
2.Two 10 segment horizontal bar graphs will be displayed (SAT and TER) with a
3.Adjust the antenna for greatest signal reception.
To exit this function, press SELECT or MENU.
Confirm Tone Options
The receiver will sound an Audio “Tone” alert when the unit powers ON and OFF as well as when the
1.From the Menu, use the Channel Switch to highlight the “Confirm Tone”. Press SELECT.
2.Use the Channel Switch to Select “ON” or “OFF”. Press SELECT to set the Tone Option.