Advanced Features
Setting Channel Presets
You can store up to 30 of your favorite channels as presets, for quick access. Presets are stored in 5 banks, each containing 6 channel presets, numbered 1 to 6.
1.Press the BAND button to activate the preset bank you want. The selected bank is shown in the top right corner of the default screen.
2.Select the channel you want to preset (see the Basic Operation and Changing Channels section).
3.Hold the numbered preset button in which you want channel stored for at least 1½ seconds. You will hear a beep and the preset bank number will indicate the memory location to which the channel has been stored. If the preset button already has a channel stored in it, the stored channel will be replaced by the new channel.
Recalling Channel Presets
The 6 presets in the active bank (A through E) can be selected by pressing the “1” – “6” buttons.
1.Press the BAND button to activate the preset bank you want. The selected bank is shown in the top right corner of the Default screen.
2.Press the desired preset button (1 – 6) to recall the preset. The channel will change and the display will revert to the Default screen for the new channel.
Searching for a Channel Preset (P.TUNE Mode)
It is possible to quickly search through all of your presets using the + or – button.
1.Press and hold the BAND button to enter the Preset Tune Mode (P.TUNE).
2.“Preset Tuning Mode” will momentarily be displayed and the top corners of the display will invert to indicate Preset Tune Mode.
3.Use the + or – button to move up or down through your presets. Only channels stored in your presets will be displayed, regardless of which bank they are stored in. Presets will be grouped and displayed by preset bank and number (ex.
12 | |
|
