menu, press the MENU button.
Auto Select
Auto Select chooses whether the Display Control Unit immediately tunes to a channel when the channel is highlighted or whether you must first press the SELECT button in order to tune to a highlighted channel in any of the list modes. Turn Auto Select ON if you would like to automatically tune to the highlighted channel without pressing the SELECT button. This will allow you to quickly listen to all the available programming on a given list. The default setting for Auto Select is OFF. To change the Auto Select option:
1.From the menu list, use the + and – buttons to highlight “Auto Select”. Press the SELECT button.
2.Use the + and – buttons to highlight “ON” or
“OFF”. Press the SELECT button to select the chosen option.
To exit the Auto Select menu, push the MENU button.
Signal Indicator
The signal indicator menu displays the strength of the SIRIUS signal from the satellite antenna and also from terrestrial (ground) transmitters. To display the SIRIUS signal strength:
1.Use the + and – buttons to highlight “Signal Indicator”. Press the SELECT button.
2.Two 10 segment horizontal bar graphs will be displayed ( SAT and TER) with a
terrestrial signal strength – if available. To exit the Signal Indicator menu, press the MENU button.
Signal Indicator
_+
SAT
SAT
Confirmation Tone
The Display Control Unit will sound an audio tone alert when the unit powers ON and OFF as well as when the
| 21 |
