Sirius Satellite Radio SDSV6V1 manual Signal, Vehicle Installation

Vehicle Installation

4Power on your Stratus 6 by pressing the Power button..

5 Be sure the vehicle is outside and the antenna has a
clear view of the sky.. Verify that you are receiving
the SIRIUS signal.. There should at least be one bar
on the upper right corner of the main display screen		jump
that denotes antenna signal strength.. You can also
press and hold menu and then press	to scroll to and highlight Signal..
Press the Select button.. The
Satellite and Terrestrial bars show	Signal
the strength of the signal being	SAT -	+
received.. If the signal reception is	TER -	+
good, press and hold menu to return

to the main display screen..

6Ensure that the Stratus 6 is tuned to channel 184.. Upon power up, the Stratus 6 should tune to channel 184 by default, when it’s not yet activated.. If it’s not on channel 184, refer to “Listening to Satellite Radio” on page 62 to learn about how to tune a channel..

7Turn on your vehicle’s stereo system.. Set it to play input from the auxiliary input source..

8You should hear SIRIUS channel 184 through your vehicle’s stereo system.. You are now ready to activate your Stratus 6..

9The audio level output of the Stratus 6 can be increased or decreased as necessary to match the audio levels of other sources in your vehicle.. Refer to “Audio Level” on page 84..

42