6. The next Setup screen will display the Data SID near the bottom of the screen where it says Sirius ID. Copy the Data SID to the space provided on page 22 of this manual.
4.When the Nav Menu screen is displayed, touch the Setup button, or select it by tilting the joystick to highlight it and press the ENTER button.
5.When the Setup screen is displayed, touch the Traffic Information selection, or select it by tilting the joystick to highlight it and press the ENTER button. Note: If the Traffic Information selection is grayed out and cannot be selected, this indicates that the SIR- ALP10T is not connected, or connected incorrectly. Check to be sure you have correctly installed the
Activating the SIRIUS Audio and/or Data Services
1.Be sure that your Alpine headunit and Navigation systems are turned on and that you have the SID information available.
2.Call SIRIUS
3.During the activation process, be sure to tell the operator that have a receiver on which you want to activate both a SIRIUS Radio service subscription and a SIRIUS Traffic service subscription. Provide the operator with both the Audio SID and the Data SID.
Once the subscription process is completed, your audio and/or navigation system is ready to use. Refer to the Alpine headunit and/or navigation system owners manuals for operation instructions.
If you have subscribed to the SIRIUS Traffic service, proceed to the next section to continue with the traffic information setup.
16 |
|
