Right-angle

Antenna (21’ cable)

SMB Connector

Mount on Roof of Vehicle

Note: Connect the RED (ACC/IGN) wire ONLY when using the SIR-ALP10T without an Alpine headunit.

DATA

Red (Pin 1) – ACC, Connect to

Ignition

Switch

Ignition Switched Circuit

Yellow (Pin 2) – Connect to

Battery Positive (+)

Black (Pin 3) – Connect to Chassis

Ground (–)

3.5-meter Data Cable (Connect to Alpine NVE-N872A)

2.5-meter Ai-NET Cable (Connect to Alpine SAT Ready Headunit or Signal Processor)

Note: It is important to follow the Input/Output configuration of the Ai-NET system. The directionality is in reference to the Audio Path.

Gray Ai-NET connectors are Audio Input

Dark Blue Ai-NET Connectors are Audio Output. (Exception is the connector on an Alpine Headunit – it can be either Input or Output depending on the position of the Ai-NET switch on the bottom of the unit.

SIR-ALP10T Installation Guide

9

Page 9
Image 9
Sirius Satellite Radio manual SIR-ALP10T Installation Guide