Copyright
Copyright 2002 by Exabyte Corporation. All rights reserved. This item and the information contained herein are the property of Exabyte Corporation. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the express written permission of Exabyte Corporation, 1685 38th Street, Boulder, Colorado 80301.
Trademark Notices
Exabyte and Exapak are registered trademarks; M2, MammothTape, SmartClean, EZ17 and NetStorM are trademarks; People Working for You and SupportSuite are servicemarks of Exabyte Corporation. Advanced Intelligent Tape (AIT) is a trademark of Sony Electronics, Inc. All other product names are trademarks or registered trademarks of their respective owners.
Revision History
000 | August 2000 | Initial release |
001 | November 2000 | Added 215M information |
002 | April 2001 | Added AIT information |
003 | March 2002 | Added Fibre Channel M2 information for |
1Preparing for installation
These instructions describe how to install or replace a tape drive in the following Exabyte® libraries:
!430M and 215M SCSI libraries with M2 tape drives
!430A and 215A SCSI libraries with AIT tape drives
!
The tape drive kit contains one Exabyte
➤Important The Fibre Channel M2 tape drive kit is for the
Note: You can convert a 430M library from SCSI to Fibre Channel
Page 2 of 12 | 1005911 |
