![](/images/new-backgrounds/1263587/26358715x1.webp)
6Connecting the cables (Fibre Channel library)
6Connecting the cables (Fibre Channel library)
For the Fibre Channel
1.Remove the protective plug from the optical fiber connector on the new tape drive, if present.
2.Attach an optical cable from the Fibre Channel hub or switch to the Fibre Channel connector on the new tape drive, as shown in the following figure.
Note: You can use the optical cable provided in the kit, or you can use your own cable. Make sure that the cable is compatible with the GBIC on the tape drive and on the hub or switch.
Tape drive optical fiber connector
3.Reconnect the power cord to the library, then power on the library. The library automatically calibrates the position of the new tape drive.
Page 8 of 12 | 1005911 |