Sirius Satellite Radio manual Boom Box SIR-BB3 Controls

Boom Box SIR-BB3 Controls

The Audiovox Sirius® Boom Box SIR-BB3 provides Power ON/OFF and VOLUME +/- pushbuttons, and a MODE pushbutton to toggle between Satellite Radio or an auxiliary audio input signal. A power-on/low battery LED is also located on the front panel.

1.MODE Pushbutton: This pushbutton toggles between Satellite Radio and an external audio input signal (MP3, CD, etc.) present at the AUX input jack.

2.AUX Jack: Accepts an audio input signal from an external audio device. When using the AUX audio input, turn the Shuttle off to preserve battery power. Adjust the volume level of the external

audio device to obtain an audio output from the

SIR-BB3. The volume			7
control on the
external audio			AUDIO	OX
device should be
set to mid-range.
1	2	3	4	5	6

-5-

3.PHONES Jack: Accepts a stereo headphone jack to provide private listening capability for the Boom Box.

4.VOLUME +/- Pushbuttons: Increase or decrease the volume of the audio output signal from the SIR-BB3. To increase the volume level, press the + pushbutton; to decrease the volume level, press the - pushbutton.

NOTE: When the PNP3 shuttle is installed, the Volume buttons on the Remote Control unit will control the audio output of the Boom Box.

5.Power On/Low Battery LED: The LED lights green when the Power On/Off pushbutton is pressed to apply power to the SIR-BB3. In addition, the LED will light red to alert the user that the batteries are nearly discharged. This condition may cause degraded performance of the SIR-BB3.

6.Power On/Off Switch: When pressed, applies power to the Boom Box; the power on LED indicator (5) lights green.

7.EJECT Button: Press this button to release the spring-loaded cover to install and remove the Shuttle from the SIR-BB3 cradle.

128-7266A

5 of 12