Sirius Satellite Radio SP-R1 manual Audio Level, Changing the Lock/Unlock Code

Changing the Lock/Unlock Code

The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock code is “0000”. This code can be maintained or changed. To change the default lock code, perform the following procedure while in the “Menu Options” List mode:

1.Use the Rotary Knob to highlight the “Lock Options”. Press the Rotary Knob to select.

2.Select “Edit Code” from the Lock Options Menu (below left) and press the Rotary Knob to select.

3.Enter the default code “0000”.

4.The “New Code” prompt will appear. Enter your new four digit code using the 0-9 number buttons (below right). You will then be prompted to confirm the new code by entering your code again.

5.The lock code is now changed.

Note: you can use this same method to Edit the code once it is changed from the default.

Audio Level

The audio output of the Sirius Sportster Receiver can be adjusted to fine-tune the audio signal level for maximum performance. This is important when using either the optional Home Docking Station or the optional Mobile Docking Station. The following setting affects both the line output and FM output levels. To change the Audio Level, perform the following procedure while in the “Menu Options” List mode:

1.Use the Rotary Knob to highlight the “Audio Level Options”. Press the Rotary Knob to select.

2.Use the Rotary Knob to adjust to the desired audio output level. A 10 segment horizontal bar graph is displayed with a “-” sign to the left and a “+” sign to the right. To store your setting and exit this function, press the Rotary Knob.

	25
Sportster SP-R1 User Guide