•If your Jump Setting is set to traffic, pressing the Jump button will immediately begin searching for your desired city’s traffic report. The band indicator on the display will change to the Jump icon to indicate a Jump search is active. Once your local traffic is found, the Receiver will automatically tune to that channel. You may have to wait up to 4 minutes for your desired report. Pressing the Jump button while the receiver is searching will cancel the search. Pressing the Jump button after the receiver has tuned to your traffic report will return to the previous channel.
•If your Jump Setting is set to JumpSet, pressing the jump button will immediately tune to your desired channel. Pressing the Jump button again will return to the previous channel.
Note: The channel preset for the Jump button remains the same regardless of which preset bank is currently selected.
Searching for a Channel Preset (P.TUNE Mode)
It is possible to quickly search through all of your presets using the Rotary Knob.
1.Press and hold the BAND button to enter the Preset Tune Mode (P.TUNE).
2.The bottom right portion of the display will change to highlight the current preset.
3.Turn the Rotary Knob in either direction to move up or down through your presets. The new channel will start to play as soon as you stop turning the Rotary Knob.
•Only stored presets will be displayed, regardless of what bank they are stored in.
•Presets will be grouped and displayed by preset bank and number (ex.
| 13 |
Sportster |
