Galaxy® Style SRA-40
Thank you for choosing a Shakespeare product. Shakespeare works hard to build reliability and durability into all of its products for maximum customer satisfaction. Customer comments are welcome. Before installing, please study the diagram and check parts supplied against those listed.
IMPORTANT: Please read all instructions before installing.
The Shakespeare Galaxy® Style SRA-40 Satellite Radio
Antenna is a versatile antenna for receiving Sirius Satellite Radio. The antenna’s versatile mounting permits attaching the antenna directly to a flat surface, to the included Pedestal Mount kit, to an optional extension mast
Rail Mount (sold separately). When the pedestal base is used, the kit allows routing the antenna’s coax cabling with or without passing the cable through the mounting surface. In all cases, a receiver capable of receiving Sirius Satellite Radio is required (not supplied).
Supplied parts:
(1)
(1)25’ Coax Cable with TNC Male and SMB connectors
The length of the cable run from the antenna to the satellite radio receiver can be extended by using the one of the cable kits listed on page 6 (each sold separately). Note: These cables replace the 25’ cable supplied with the antenna, and must be used as supplied. They cannot be lengthened, shortened, or connected together as extensions.
(1)Bag containing: (1) Extension shaft, (1) Lockwasher, (1) Retaining nut
(1)
(1)Rubber
(1)Surface Mounting Flange
(1)Mounting Gasket with
(3)
Tools required: Screwdriver. Marking pencil, drill and drill bits (9/16”, 7/64”), needle nose pliers, or other tools appropriate to your specific application may also be needed.
Required materials: Silicone Sealer (RTV) when flush mounting
DO NOT CUT OR ALTER THE ANTENNA CABLE.
DO NOT REMOVE ITS CONNECTOR.
