Sirius Satellite Radio SRH2000 manual Installing the Antenna, Installation and Setup

Models: SRH2000

1 98
Download 98 pages 51.14 Kb
Page 20
Image 20
Installing the Antenna

Installation and Setup

Installing the Antenna

You will need to purchase a SIRIUS Outdoor Antenna for your Tuner.. Carefully follow the installation instructions included with the outdoor antenna for best results..

1When the outdoor antenna is installed, temporarily plug the antenna cable into the ANTENNA connector on the back of the Tuner for testing, to determine if you have correctly installed and aimed the antenna..

2Connect the audio output of the Tuner (either audio output L/R or digital audio) to your sound system.. Turn your sound system on..

3Plug the Tuner into a 110 VAC wall receptacle.. The front panel STANDBY LED will light red..

4Turn the Tuner on and listen for audio.. If no audio is heard, make adjustments to the antenna until audio output is heard.. This is the desired antenna aiming position..

5After determining the optimum antenna aiming position, turn the Tuner off, disconnect the power adapter from the wall outlet receptacle, and disconnect the antenna cable..

6Plan the routing of the outdoor antenna cable to the Tuner.. Be sure you avoid any obstructions that could crimp, kink, or twist the cable.. Use protective grommets wherever rough openings are encountered.. Note: Do not cut the antenna cable..

20

Page 20
Image 20
Sirius Satellite Radio SRH2000 manual Installing the Antenna, Installation and Setup