Sirius Satellite Radio SRH2000 manual Volt Trigger Information

Visit the SR-H2000 support page at www..sirius..com for additional downloadable remote control files..

12 Volt Trigger Information

The 12V Trigger Input allows your 12V-trigger-capable preamp or receiver to force the SR-H2000 Tuner to go from STANDBY mode (power button illuminated, front panel display off) into ON mode (power button not illuminated, front panel display on) or vice versa without the need to press the POWER button..

To enable this feature, connect a 1/8” mono plug cable (tip + / sleeve — ) from your preamp or receiver’s 12V Trigger Output to your Tuner’s 12V Trigger Input jack on the rear panel.. So long as the Tuner stays plugged into an active AC outlet, your Tuner is ready to respond to power mode changes sent from your preamp or receiver..

To disable the 12V Trigger Input feature, simply do not connect anything to the 12V Trigger Input jack on the rear panel of the Tuner..

25