Manuals / Sirius Satellite Radio / Home Audio / Satellite Radio

Sirius Satellite Radio SRS-2VB Tools Required, Caution and Warnings, Splitter Port Identification

Models: SRS-2VB

1 20

Download 20 pages 45.36 Kb

Page 3

Tools Required

Tools Required

A phillips-type screwdriver and a 3/8 in. wrench is needed for installation. De- pending upon the type of installation, a power drill with a 3/32 in. drill bit may also be required.

Caution and Warnings

WARNING: Be sure not to cut, damage, or puncture the external jacket of the antenna cables during the installation procedure. Damage to the antenna cable can cause the SIRIUS signal to be degraded or unavailable, and can also cause water to intrude into the antenna cable causing the cable to fail.

Splitter Port Identification

For a successful installation, the various cables used in the installation process described later in this manual must be connected to the correct ports on the Split- ter. The following illustration identifies the 3 ports on the Splitter. This diagram should be used for reference during installation.

IN

	IN
	MODEL SRS-2VB
OUT1	2300-2400 MHz	OUT2
OUT1		OUT2

OUT1OUT2

Home Distribution Kit Installation Manual

Image 3

Sirius Satellite Radio SRS-2VB Tools Required, Caution and Warnings, Splitter Port Identification, OUT1OUT2

Contents

For Use With One or Two SIRIUS Radios SIRIUS Home Signal Distribution KitInstallation Manual for Satellite RadioBox Contents OUT1OUT2 Tools RequiredCaution and Warnings Splitter Port IdentificationPage ARMPOD A Antenna InstallationBASE NORTHEAST NORTHWESTSOUTH RG-174 RG-6Adapter Cable 3. Antenna Mounting Options Wall MountRoof Mount Mast Mount 4. Adjusting and Aiming the Antenna Antenna Pod Cable InstallationAdjustment Adjustment ScrewOUT2 Use terminator if no second receiverOUT2 OUT1OUT2 Home Distribution Kit Installation ManualOUT2 OUT1Antenna Specifications Troubleshooting1221 Avenue of the Americas New York, NY SIRIUS Satellite Radio90 DAY LIMITED WARRANTY Satellite Radio AccessorySHDK1 Page