Operation
Once the Boombox has been installed according to the preceding directions, power on the Boombox by pressing the Power On/Off button on the front panel. The light on the front panel of the Boombox should light green to indicate the power is on. If the receiver does not power on at the same time, press the Power On/Off button on the receiver.
You should hear the SIRIUS audio. If you do not, adjust the volume of the Boombox by pressing the Volume Up and Volume Down buttons on the front panel. If you still do not hear any audio, press the AUX button.
If you want to listen to an external audio device such as an MP3 player or CD player through the Boombox, do the following:
1.Connect the output of the audio device to the AUX connection at the front of the Boombox.
2.Initially set the volume level on the audio device to
3.Press the AUX button on the Boombox to select the AUX input.
4.Adjust the volume on the external device to obtain satisfactory audio output from the Boombox. If the sound is distorted, lower the volume level on the audio device.
If the light on the front panel should turn red while the Boombox is powered on, this indicates that the battery power is low. Replace the batteries.
8 | Starmate Replay STB2 Boombox User Guide |
|
