BM 1619X00324 3-04 3/16/04 2:13 PM Page 2

Power Tool Safety Rules

!WARNING Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep by-standers, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

Double Insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double Insulation xxxx eliminates the need for the three wire grounded power cord and grounded power supply system. Before plugging in the tool, be certain the outlet voltage supplied is within the voltage marked on the nameplate. Do not use “AC only” rated tools with a DC power supply.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. If operating the power tool in damp locations is unavoidable, a Ground Fault Circuit Interrupter must be used to supply the power to your tool. Electrician’s rubber gloves and footwear will further enhance your personal safety.

Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately.

Damaged cords increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W." These cords are rated for outdoor use and reduce the risk of electric shock. Refer to “Recommended sizes of Extension Cords” in the Accessory section of this manual.

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Keep handles dry, clean and free from oil and grease.

Avoid accidental starting. Be sure switch is “OFF” before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch “ON” invites accidents.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand

-2-

Page 1 Page 3
Page 2
Image 2
Skil 1815, 1820, 1825, 1810 manual Power Tool Safety Rules, Work Area
Page 1 Page 3

1815, 1825, 1820, 1810 specifications

The Skil 1810, 1820, 1825, and 1815 are a series of power tools designed to meet the demands of both professionals and DIY enthusiasts. Each model offers unique features that cater to specific needs while maintaining Skil's reputation for quality and reliability.

The Skil 1810 is known for its versatility as an impact drill. It features a powerful motor that delivers high torque, making it ideal for drilling into various materials such as wood, metal, and masonry. One of its standout technologies is the variable speed control, allowing users to adjust the speed to suit the task at hand. Additionally, the 1810 is equipped with a robust keyless chuck, ensuring easy bit changes and secure gripping.

Moving on to the Skil 1820, this model incorporates advanced electronics that enhance performance and user experience. Its electronic feedback system helps maintain consistent power under load, ensuring efficient drilling and driving. The 1820 also boasts an integrated LED light, illuminating work areas in dim lighting conditions. This feature is particularly valuable for tasks that require precision and visibility, such as drilling in tight spaces.

The Skil 1825 builds on the strengths of its predecessors and introduces even greater functionality. It includes a hammer drill feature, enabling users to tackle tougher materials with ease. This dual-function capability allows for both drilling and hammering action, making it a versatile tool for various applications. The 1825 also features an ergonomic design, providing increased comfort during extended use and reducing user fatigue.

Lastly, the Skil 1815 offers a more compact option while still delivering powerful performance. This model is particularly well-suited for users who require a lightweight tool for overhead or precision work. It retains many essential features found in the other models, such as variable speed control and a keyless chuck. Its design ensures that it remains easy to maneuver without sacrificing power or effectiveness.

In summary, the Skil 1810, 1820, 1825, and 1815 represent a range of power tools that highlight Skil's commitment to innovation and user satisfaction. Each model is designed with distinct features and technologies, making them suitable for different applications and user preferences. Whether it's versatility, advanced electronics, hammer drill capability, or compact design, Skil provides options that cater to a variety of needs in the realm of power tools.
Top Page Image Contents