SkyLink HU-318 setup guide Setup App, “Device Settings”

2.4 DEVICE SETTINGS					SETUP APP
	1. Tap on	2. Tap on		3. Tap on one of the
	“Device Settings”		your zone	“Unused” buttons

4.Enter Your Device Name and Tap on “Return”

5.Select either ON/OFF or No-Dim/Dim and tap on “Add”

Device Name: eg. Bed Light, eg. Table Lamp

	7. Put your skylink receiver into
6. Tap on the Button you created	programming mode and Tap on “Learn”

To set your skylink receiver into programming mode please refer to page 18 of this guide.

After Programmed,

Tap on “Home”

2.4 SETUP APP 10