SkyLink HU-318 Putting Receiver Into Programming Mode, Mini Screw-InDimmer Model LS-318

PUTTING RECEIVER INTO PROGRAMMING MODE

Mini Screw-In Dimmer

Model: LS-318

Start with dimmer off. Position the slide switch to the desired operating mode. Power on (by turning on the light switch or the circuit breaker). The LED will flash quickly for Regular On/Off mode, slowly for Flashing Alert mode or will be solid for Countdown Timer mode. LS- 318 is now in programming mode and will stay that way for 15 seconds.

On/Off & Dimming Control

Model: MD-318

Start with dimmer off; Power on the dimmer (by turning on light switch or the circuit breaker), you will hear a beep from the MD- 318 indicating unit is now in programming mode and will stay that way for 15 seconds.

Mini Screw-In Dimmer

Model: LX-318

Start with dimmer off. Power on the unit by turning on the light switch or the circuit breaker. You will hear a beep. LX is now in programming mode and will stay that way for 15 seconds.

On/Off Control

Model: MR-318

Start with unit powered off. Power on the unit by turning on the light switch or the circuit breaker. Your will hear a beep from the On/Off control which indicates the unit is in programming mode and will stay that way for 15 seconds.

Indoor/Outdoor Plug-In On/Off Control Model: PA-318

On-Off/Countdown Timer Mode:

Start with the load turned off. Press and hold the ‘SET’ button; Red LED will flash quickly (release for On/Off mode) and then it will stay on solid (release for Countdown Timer mode)

Wireless Wall Switch

Model: WE-318/WR-318

On-Off/Countdown

Timer/ Flashing Alert Mode:

Start with the load turned on. Press and hold ‘SET’ button; Blue LED’s will flash quickly (release for On/Off mode), then slowly (release for Flashing Alert mode- only the WR-001 has this feature) and then it will be solid (release for Countdown Timer mode).

Plug-In Dimmers

Model: PL-318/PR-318 (repeater)

PR-318S(repeater for security)

On-Off/Countdown

Timer/ Flashing Alert Mode:

Start with the load turned off. Press and hold ‘SET’ button; Red LED will flash quickly (release for On/Off mode), then slowly (release for Flashing Alert mode) and then it will be solid (release for Countdown Timer mode).

Garage Door Smart Button

Model: GB-318

Press and hold the black learn button (right side of the unit) for approx. 3 seconds. The LED light will start to blink faster. Immediately let go and transmit the learn code from your transmitter

PUTTING RECEIVER INTO PROGRAMMING MODE 18