OPERATION

2.You must enter a valid password, either the Master Password, or Secondary Password to disarm the system before entry delay expires.

3.When a valid password is entered, you will hear “System Disarmed” and the entry delay beeping will stop, the ARM LED will be off.

Note:

- The control panel can also be disarmed remotely when nobody is home, with a

touch tone phone. Please refer to “Remote Operation by Telephone” on page 27.

ADVANCED PROGRAMMING

Learn Keychain / Keypad Remotes

Additional keychain or keypad remotes can be programmed to the control panel. Maximum of 5 keychain/keypad remotes can be programmed to the control panel.

-Keychain or keypad remotes should be programmed to Device 6 to Device 0.

Follow the instructions below to program remote(s) to remote location(s) 6, 7, 8, 9, or 0, which is the bottom row of the numeric keypad of the control panel.

- If 3 consecutive incorrect passwords are entered, alarm will sound immediately,

the control panel will be in panic mode, and start calling the emergency phone

numbers.

Disarming a triggered control panel

If "System Panic" is announced from the control panel after it has been disarmed, that means the alarm was triggered when it was in armed mode. Follow the procedures below to set the control panel back to standby mode.

1.

If the alarm was caused by sensor(s), there will be flashing LEDs and

 

beeping indicating which sensor(s) triggered the alarm. You may want to

 

check the condition of the triggered sensor(s), the sensor(s) may be damaged

 

if there were break-ins.

2.

You need to reset the sensor manually by triggering it twice, i.e. open and

 

then close a door / window sensor, or walk in front of the motion sensor. The

 

LED representing that sensor will stop flashing after it receives the signal

 

from the sensor.

3.

You must now enter the password again on the control panel or press the

Step

Keys

Function

Description

1

[PROG]

Enter Program-

Enter master

 

[MPIN]

ming mode

password to

 

 

 

programming mode

2

[4]

Select learn

 

 

 

remote

 

programming

3

[6] to [0]

Select remote

Select a remote

 

 

location

location [6], [7],

 

 

(Max. 5 remotes)

[8], [9] or [0].

4

Activate the

Trigger remote

Once the signal is

remote by

 

transmitted to the

 

 

 

pressing any

 

Control Panel, that

 

one of the

 

signal which will

 

buttons.

 

be stored.

Note

3 beeps for valid password. 1 long beep for invalid password.

After [4] is entered, some zone LEDs will flash or stay off. The zone LEDs represent whether that zone is already occupied by another remote.

** See Table A below.

After you have selected the remote location, that zone LED will be on.

You will hear

[Device X Accepted], where “X” is the remote location.

disarm button on the keychain

remote, as

an acknowledgement of the alarm

event. This will set the control

panel back

to standby mode.

Disarming under Duress

If you are forcibly compelled to disarm the control panel, you may enter the Duress Password. Entering the duress password will terminate the entry delay, i.e. no more entry delay beeping. But the control panel will silently call the emergency phone numbers for help. The called party will hear the voice announcement “System Panic”.

Note:

- The default duress password is [3838].

ZONE LED

DESCRIPTION

Off

Zone is not occupied by any remote

Flashes twice

This zone is occupied by another remote. Programming another

 

remote to this zone will overwrite the previous remote.

Flashes once

This zone is occupied by a control module* (Optional).

 

You can still program a remote to this zone, and it will not overwrite

 

the control module* you have in this zone. (Refer to page 40 Home

 

Automation for more information)

Flashes once,

This zone is occupied by a remote AND a control module*.

then twice

If you program another remote to this zone, it will overwrite the

 

previous remote, but not the control module*.

**Table A: Zone LED status for learning keychain/keypad remote(s).

*Please refer to learn control module on page 40.

22

35

Page 24
Image 24
SkyLink ML-100, ML-001 manual Learn Keychain / Keypad Remotes, Disarming a triggered control panel, Disarming under Duress

ML-001, ML-100 specifications

The SkyLink ML-100 and ML-001 are innovative products in the realm of machine learning and artificial intelligence, designed to simplify the process of deploying and managing machine learning models in various applications. As devices that cater to developers and businesses alike, they bring cutting-edge technologies to the forefront, ensuring a seamless experience for users looking to utilize machine learning effectively.

The SkyLink ML-100 is specifically engineered to provide high-performance capabilities in a compact form factor. One of its main features is the advanced processing unit, which leverages state-of-the-art neural network architectures. This allows the device to handle complex algorithms and process large datasets efficiently. Additionally, the ML-100 is equipped with robust connectivity options, including Wi-Fi, Bluetooth, and support for various IoT protocols, making it an ideal choice for applications in smart homes, industrial automation, and beyond.

On the other hand, the SkyLink ML-001 serves as a versatile platform for developers who wish to train and deploy their machine-learning models. It is designed with a user-friendly interface that supports easy integration with popular programming languages such as Python and R. The ML-001 also boasts an extensive library of pre-built models and algorithms, enabling users to accelerate their development processes. Furthermore, the device comes with advanced data analytics features, providing insightful reports and visualizations that help users understand their model performances better.

Both devices prioritize energy efficiency, ensuring that they can run demanding models without excessive power consumption. They feature adaptive cooling technologies to maintain optimal operating conditions, thereby prolonging device lifespan and enhancing performance stability.

SkyLink incorporates robust security measures into both models, protecting sensitive data and ensuring secure communications. With end-to-end encryption and secure access controls, businesses can rest assured that their data remains confidential.

In conclusion, the SkyLink ML-100 and ML-001 represent significant advancements in machine learning technologies, offering a unique blend of performance, versatility, and security. Whether targeting developers seeking a platform for model deployment or businesses looking for powerful, connected devices, these products stand out in the competitive landscape, providing the tools necessary to harness the full potential of machine learning.