TESTING YOUR SYSTEM

Before you learn how to use your security system, test to make sure that the Door/Window Sensors and the Keychain Transmitter are communicat- ing with the Audio Alarm.

TESTING THE DOOR/WINDOW SENSORS

Turn on the Audio Alarm, (slide the button on the bottom of the unit to “ON”), allow 30 seconds for the Audio Alarm to warm up. The red “ON” light will appear. (when testing, do not turn the “ARM” light on or the siren will sound.)

1.Open the door or window that has the sensor on it.

2.The Audio Alarm will beep and the “ON” light will flash once, meaning the Audio Alarm has accepted the signal from the Door/Window Sensor. If the unit didn’t beep, it is not communi- cating with the sensor. Relocate the Magnet closer to the Magnetic Switch or the Door/ Window Sensor. It may need to be programmed to communicate with the Audio Alarm, (see Program Sensors and Transmitters)

3.Repeat the above 2 steps with the other door or window with the sensor.

TESTING THE KEYCHAIN TRANSMITTER

Turn on the Audio Alarm so that only the “ON” light appears. Press button 1, 2 or 3 on the Keychain Transmitter, and if the Key- chain Transmitter is communicating with the Audio Alarm, the "ON" light will flash once. The "ARM" light will come on if you press button 1.The Audio Alarm may beep once depending if you have the sound turned on. Button 2 activates and deactivates the sound. If the "ON" light does not flash, you must program the Keychain Transmitter to communicate with the Audio Alarm. (See Program Sensors and Transmitters)

10

LIGHTS AND SOUNDS

LIGHTS

ON light lit

-power is being sent to the Audio Alarm.

ALL BELOW SCENARIOS INCLUDE THE “ON” LIGHT LIT

LO BATT light off

- the Audio Alarm is being powered by electrical

 

current and/or the battery.

LO BATT light on

- the Audio Alarm is being powered by electrical

 

current only, the battery is weak and needs to be

 

replaced.

“ARM” light on

- the Audio Alarm is armed and will sound when

 

any sensor is activated.

“ARM” light off

- the Audio Alarm is not armed and will not sound

 

when any sensor is activated.

 

- it will however respond to both ARM buttons and

 

the PANIC button on the Keychain Transmitter.

SOUNDS

You are able to turn on/off the short beep sound made by the Audio Alarm when any of the sensors are activated, by pressing button 3 on the Keychain Transmitter.

One long beep

- occurs when the Audio Alarm is turned on with the button

 

on the bottom of the unit.

One short beep

- when a sensor is activated and the Audio Alarm is on but

 

not armed.

 

- anytime buttons # 1, 2 or 3 is pressed on the Keychain

 

Transmitter and the Audio Alarm is on but not armed.

11

Page 10
Image 10
SkyLink SC-10 manual Testing Your System, Lights and Sounds

SC-10 specifications

The SkyLink SC-10 is a state-of-the-art drone that has garnered attention for its innovative design and advanced technological features. Ideal for both professional and personal use, the SC-10 combines high-performance capabilities with ease of operation, making it a versatile choice for various applications, from aerial photography to surveillance.

One of the standout features of the SkyLink SC-10 is its robust camera system. Equipped with a 4K Ultra HD camera, the drone captures stunning high-resolution images and videos, ensuring that every detail is perfectly rendered. With a three-axis gimbal stabilization system, users can expect stable and smooth footage even in windy conditions. The camera also supports real-time broadcasting, allowing operators to stream live video feeds directly to their devices.

In terms of flight capabilities, the SC-10 offers impressive performance. It has a flight time of up to 30 minutes on a single charge, which is above average for a drone in its class. This extended battery life allows for longer missions without the need for frequent recharging. The drone also features a control range of up to 5 kilometers, providing ample distance for exploration and capturing images over vast areas.

The SC-10 is engineered with advanced navigation technologies, including GPS and GLONASS support. This dual-satellite system enhances the drone's positional accuracy, making it more reliable during flight. Additionally, the drone features an intelligent return-to-home function, which automatically guides the drone back to its launch point in case of low battery or lost signal, enhancing safety during operation.

User-friendliness is another hallmark of the SkyLink SC-10. The drone comes with a dedicated mobile app that simplifies flight planning and control. The intuitive interface allows users to set waypoints, monitor flight statistics, and adjust camera settings effortlessly. Furthermore, the SC-10 supports various flight modes, including follow-me and orbit mode, catering to both novice and experienced pilots.

Another significant aspect of the SC-10 is its durable construction. Built with high-quality materials, it is designed to withstand the rigors of outdoor use. The foldable design makes it portable and easy to transport, making it a favored option for adventurers and professionals alike.

In summary, the SkyLink SC-10 combines superior imaging technology, long flight times, advanced navigation, and user-friendly features into a single package. Whether for capturing breathtaking landscapes or conducting critical surveillance, this drone stands out as a reliable and efficient tool for a variety of aerial needs.