DELETE SENSORS AND TRANSMITTERS
You can not delete one sensor/transmitter from the Audio Alarm at a time. You must clear all the sensors and transmitters that are currnetly com- municating with the Audio Alarm, then
Delete All Sensors and Transmitters
1. Turn the Audio Alarm off by sliding the switch on the bottom of the Audio Alarm so that the “ON” light is not lit.
2. Press and hold the learn button found on the bottom of the Audio Alarm.
3. While holding the button, turn on the Audio Alarm by sliding the switch on the bottom.
4. You will hear a long beep followed by a series of short beeps. When you hear the short beeps, re- lease the learn button.
You have now cleared all sensors and transmitters from communicating with the Audio Alarm.
INSTALLATION
Installation is done using the screws included. For your convenience, we have also included wall anchors and a template to aid in the installation of the Audio Alarm and the Door/Window Sensors.
How to use the template to help in the installation:
1.Tape the template to the wall where you would like the component to be
2.Screw part way into the surface where the holes are marked on the template
3.Unscrew the screws and remove the template
4.Screw the component in place where you started the screws
We recommend that you install all components first with the double sided tape included and once you are satisfied with the positioning, reinstall using the screws.
INSTALLING THE AUDIO ALARM
The Audio Alarm is water resistance so it can be installed indoors or outdoors within access to an electrical outlet. Be careful that the AC adapter wire doesn't guide rain water to the DC JACK located at the bottom of the Audio Alarm.
There are two ways to attach the Audio Alarm to the wall:
Hanging it on two stationary screws
1.Using the template provided, insert the two screws into the wall.
2.Align the two top keyholes on the triangular tabs located at the back of the Audio Alarm with the screws on the wall.
3.Gently push the Audio Alarm on to these two screws.
4.Open the small door on the bottom of the
Audio Alarm.
5. Insert the AC adapter and the antenna in the appropriate holes.
6. Close the small door so that the AC adapter and the antenna are running through the appropriate spaces in the door.
