Skyworth LCD-32L16H instruction manual Menu in PC Mode

Geometry menu

ANALOG MENU SCREENS

PC MODE

and LCD TV.

PC Input typical display modes. The following table is an illustration of some of the typical video display modes.

15 Pin Mini D-Sub Connector

1	640X480(recommend 60Hz)
2	800X600(recommend 60Hz)
3	1024X768(recommend 60Hz)
4	480p
5	576p
6	720p(50/60Hz)
7	1080i(50/60Hz)

MENU in PC Mode

Enter menu by pressing the "MENU"

button on the remote control. In PC mode state, there are 4 geneal menus (Picture, Sound, Time ,parental control)supported all functions are the same as in TV mode.

when you connect VGA cable to the jacks of PC or connect HD cable to device such as DVD, and select the signal source as "VGA" or "YPBPR" the screen menu will active.

You can use the function to adjust the display setting automatically or manual.

H-Position

Press left/right arrow key to adjust the H-Position of television the screen appear as . V-Position

Press left/right arrow key to adjust the V-Position of television the screen appear as. Phase

Press left/right arrow key to adjust the phase of the picture. This item is only available in VGA mode .

Colck

Press left/right arrow key to adjust the updating frequency of the picture. This item is only available in VGA mode .

Auto Adjust

Press left/right arrow key to auto adjust PC size and position. This item is only available in VGA mode .

-15-