WARNING AND PRECAUTION

Read all of the instructions before operating the set. Keep these instructions well for later use.

PRODUCT

The ventilation should not be impede by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.

Do not push any objects of any kind into this unit through the cabinet slots as they could touch the current carrying parts or short-circuit parts, resulting in fire, electric shock, or damage to the unit.

Unplug the set when it is not used for a long period of time.

Do not dismantle this product by yourself as this may cause damage.

Do not touch the screen surface with fingers as this may scratch or mar the LCD screen.

Do not impact the LCD screen with hard pressure as this may damage the LCD screen severely.

The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.

POWER

Please use the core plug as required.

PLUG

Unplug the set under the following conditions:

If the set will not be used for a long period of time.

If the power cord or the power outlet/plug is damaged.

Follow the instructions to install and adjust the product. Adjust those controls that are covered in this operating instructions as improper adjustment of other controls may result in damage. If this happens, unplug the set and refer to the service personnel.

If the set is subject to impact or has been dropped to have the cabinet damaged.

The mains plug is used as the disconnect device and shall remain readily operable.

POWER CORD & SIGNAL CABLE

Do not allow anything to rest on or roll over the power cord & signal cable.

Protect the power cord & signal cable from being trampled.

Do not overload the power cord or power outlet.

Do not expose the power cord & signal cable to moisture.

Page 2
Image 2
Skyworth LCD-32L16H instruction manual Power