Skyworth SLTV-26L16A-2 manual Plug in the TV, Put Batteries in the Remote, Turn on the TV

Connections and Setup

Plug in the TV

Plug the end of the power cord into the back of the TV. Plug the other end into a wall outlet. Insert the plug completely into the outlet. Do not plug into an outlet controlled by a light switch.

Put Batteries in the Remote

Remove the battery(AAA) compartment cover from the back of the remote by pushing the Tab and lifting off the cover.

Insert two fresh batteries. Make sure the polarities (+ and -) are aligned correctly. Replace the cover.

Turn on the TV

Turn on your TV by pressing the Power button on the side of the TV or ON/OFF on the remote control.

How to Use the Remote Control to Complete the Initial Setup

The technical term is "Navigation" - how you move through the

on-screen menus. The theory is the same throughout the menu
screens: highlight your choice and select it.
To highlight a menu item, press the arrow buttons on the remote
to highlight one of the items listed on the screen. Use the up or	ZOOM	ZOOM
down arrow button to move up or down. Use the right or left
arrow button to view other selections for a menu choice or to		OK
display a sub-menu.	Arrows

Note: Highlighted means that the menu item stands out from

other menu items on the list (appears darker, brighter, or a different color).

Complete the Initial Setup

The menu system in your TV allows the TV's features to work properly. The first time you turn on your TV.

Set the Menu Language

From SETUP press MENU LANGUAGE, the first part of the setup allows you to select your preferred language for the menu system. If English is your preferred language, press OK and go to set the Picture Preset mode. To choose another language, press the LEFT or RIGHT arrow button until that language is highlighted, and press the OK button.

Complete Channel Setup

Make sure you've connected the TV to cable or an off-air signal before you start the next part of the setup. Set the Signal Type From the Channel menu, Select Auto Channel Search. Press the left or right arrow button to high light Signal Type. If you connected Cable to your ANTENNA/CABLE INPUT jack, the option is chosen for you and you can press the down arrow button to continue. To choose Antenna, press the right arrow button and then press the down arrow button to continue. Complete the Channel Search With Auto Channel Search highlighted, press OK to begin the channel search. There are several things to be aware of when the TV's searches for channels. If you chose Cable as your signal type, the search takes a while because it's looking for analog and digital channels, and then it's removing scrambled channels found. Here is what happens during the search:

1.The search first looks for analog channels and places the number of channels found next to Analog Channels found.

2.The search then looks for digital channels and places the number of channels found next to Digital Channels found.

3.When Auto Channel Search in progress, you can press the OK and CLEAR button to cancel the search, any channels already found will be stored.

4.After auto channel search completing, press CLEAR to exit the menu system. You might find there are still some channels in your list that are unavailable to view. To get rid of these channels, press MENU and choose Channel. Highlight and select EDIT CHANNEL NAME. Note that removing channels from your channel list may be time consuming, so You might want to do it later.

-12-