Using the Center Column

Center Column

Caution

NO

YES

Prohibited

 

 

Locking Collar

 

 

Center Column Stopper

 

 

Hold onto the Pan Head with one hand, and

You may injure your hand by a sudden fall, if

To avoid unnecessary camera vibrations, try to

loosen the Center Column Locking Collar with

you let go of the Pan Head before locking the

keep the Center Column height to a minimum.

the other hand.

Collar.

Also use the larger legs first, when extending

Raise or lower Pan Head to desired height, and

Turn the Locking Collar with your fingers on the

the legs.

while maintaining a hold of the Pan Head, tight-

side of the Collar.

 

en the Locking Collar.

 

 

 

R

PRO 400DX

 

 

 

 

Operating Instructions

 

 

Congratulations on the purchase of a SLIK PRO 400DX Tripod.

 

 

The SLIK Corporation has designed your tripod to be a sturdy,

 

 

rugged, dependable product that will provide you with many years of

 

 

satisfactory use.

 

 

Please take a few moments to read this instruction sheet carefully so

 

 

you can take full advantage of your Tripod's many fine features.

 

 

Retain this instruction sheet in case you might want to refer back to it.

 

 

Caution

 

 

This caution icon refers to information pertaining to important safety

 

 

procedures in preventing injuries, and damages which may occur as

 

 

a result of mishandling this product.

 

 

Prohibited

 

 

This prohibited icon refers to information pertaining to prohibited con-

D393E-1

 

tents. Please refer to instructions closely to avoid accidents.

 

 

Specification

Length folded

650mm

 

(25 7/12")

Max. operating height 1,550mm

 

(61")

Max. center column ext. 280mm

 

(11")

Weight

2.52kg

 

(5 lbs 9 oz)

Inverting the Center Column

Caution

Remove the Pan Head when inverting &/or

Remove the center column Base Stopper turning

Loosen the Center Column Stopper and the

replacing the Center Column.

to the way of arrow.

Locking Collar, and then pull out the Center

 

 

Column.

Components

Pan Head

Center Column

Locking Collar

Center Column Stopper

3-Position Leg Angle Adjustment Locks

Leg

Pan Head

 

Quick Release Platform

 

Quick Release

 

Lock Lever

 

Pan & Tilt Handle

 

Handle Connecting

Center Column

Screw

 

Main Body

 

 

Camera

Soft Grip

Mounting Screw

Vertical Tilt Handle

Panning Lock Knob

Mounting Wing Nut

Caution

Lower part of Center Column

Leg Lock Lever

 

Options

 

 

 

Equipment that can be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

used with this Tripod

￿￿￿￿￿￿THREAD￿￿￿￿ADAPTER￿￿￿￿SET ￿￿￿￿￿￿￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Prohibited

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insert the Center Column from the lower side of

Make sure to re-attach the Base Stopper, in

By inverting the Center Column, it is possible to

Main Body, and tighten the Locking Collar and

order to prevent the Center Column from falling

do copy, and close up work.

the Center Column Stopper.

out.

 

Base Stopper

Leg Lock

Rubber Leg Tip

On this tripod, please buy Thread Adapter Set when the Pan Head that there are large screw (U3/8) tripod installation screws is attached.

This product has been designed to handle equipment weighing under 5 kgs (11 lbs).

Do not overload.

Some equipment weighing under 5 kgs (11 lbs), such as long lens- es, may not balance well due to its weight distribution. In such case, please use a larger tripod.

Care of the Tripod

DO NOT apply any grease or oil to this product. Clean with a mild detergent and a soft cloth only. DO NOT use close to flame. Avoid extreme heat.

OIL THINNER

Slik corporation reserves the right to make changes in design and/or improvements on the products without any obligation and advanced notice.

SLIK CORPORATION

853, Kayama, Hidaka-shi, Saitama 350-1231, Japan Phone 81-429-89-2141 Fax. 81-429-85-0210 ©2005

Printed in Thailand.

Carrying the Tripod

Setting up

Pan Head mounting post

Prohibited

Caution

Prohibited

Carrying a tripod with a camera left on can

Prevent accidental equipment fall, or tripod tip-

Do not attach camera directly to the threaded

result in unexpected accidents. We therefore,

ping over, by making sure all levers, knobs,

post of the Center Column.

recommend you to remove your camera while

and handles on the tripod are securely tight-

This may damage both camera and tripod.

carrying the tripod.

ened, and that all three legs are opened all the

 

 

way.

 

Page 1
Image 1
SLIK PRO 400X manual Using the Center Column, Operating Instructions, Specification, Inverting the Center Column, Pan Head