Free-motion monogramming and embroidering

-Set the machine as illustrated.

-Turn stitch width dial to "0".

-Remove the presser foot and the presser foot holder.

-Attach the feed dog cover. (1)

-Lower presser foot lever before starting to sew.

-Adjust the stitch width according to the size of lettering or design.

Preparation for Monogramming and Embroidering*

-Draw the desired lettering or design on the right side of the fabric.

-Stretch the fabric between embroidery hoop as firmly as possible.

-Place the fabric under the needle. Make sure the presser foot bar is down in its lowest position.

-Turn the balance wheel towards you to bring up the lower thread through the fabric. Sew a few securing stitches at the starting point.

-Hold the hoop with thumb and forefingers of both hands while pressing the material with the middle and third fingers and supporting the outside of hoop with smaller finger.

* Embroidery hoop not included with machine.

29

Page 33
Image 33
Smart Parts 100 s owner manual Free-motion monogramming and embroidering, Preparation for Monogramming and Embroidering

100 s specifications

The Smart Parts 100S is a revolutionary paintball marker that has gained considerable attention in the paintball community for its innovative design and cutting-edge features. This marker is particularly aimed at competitive players who demand reliability, performance, and precision on the field.

One of the standout features of the Smart Parts 100S is its lightweight design. Weighing in at just under two pounds, this marker allows for greater mobility and agility, essential for fast-paced paintball matches. The minimalistic build doesn't compromise on durability; the body is crafted from high-quality aluminum, providing both strength and sturdiness while keeping the weight manageable.

Equipped with an electronic trigger system, the Smart Parts 100S offers players an adjustable rate of fire, allowing for a customizable shooting experience. The response is crisp and quick, which can be critical during high-pressure gameplay. Beyond the electronic trigger, the marker incorporates a user-friendly interface that allows players to easily switch between different firing modes, including semi-automatic, burst, and fully automatic settings.

In terms of technology, the 100S utilizes a spool valve system that delivers a smoother shot with reduced recoil. This advanced mechanism significantly enhances accuracy and consistency, letting players maintain tighter groupings when firing. The built-in adjustable regulator further improves performance by ensuring stable velocity, irrespective of changing atmospheric conditions.

The marker comes with a high-capacity, low-profile loader that minimizes the likelihood of jams and ensures that players can maximize their firing potential without frequent interruptions. Additionally, it features a micro-branch air input that increases air efficiency, allowing players to get more shots per tank fill.

Another notable characteristic of the Smart Parts 100S is its compatibility with a wide range of accessories, including various barrels and grips. This adaptability permits players to customize their setup to suit their playstyle, making it a versatile choice for both novices and seasoned veterans.

In conclusion, the Smart Parts 100S stands out as a top-tier paintball marker, blending lightweight design, advanced electronic features, and superior accuracy. For players looking to enhance their game, the 100S offers an impressive package that is hard to ignore.