Threading the upper thread

This is a simple operation but it is important to carry out correctly.

-Start by raising the needle to its highest point (1), and also raise the presser foot to open the tension discs. (2)

Note:

For safety, it is strongly suggested you turn off the power before threading.

-Lift up the spool pin. Place the spool of thread on the holder with the thread coming off the spool as shown. For small thread spools, place small side of spool cap next to spool.(3)

-Draw thread from spool through the upper thread guide. (4)

-Guide thread around thread guide (5) pulling thread through pre- tension spring as illustrated.

-Thread tension module by leading thread down right channel and up left channel (6). During this process it is helpful to hold the thread between the spool and thread guide (4).

-At the top of this movement pass thread from right to left through the slotted eye of the take-up lever and then downwards again. (7)

-Pass thread behind the flat, horizontal thread guide. (8)

-Now take thread behind the thin wire needle clamp guide and then down to the needle which should be threaded from front to back. Pull about 6-8 inches of thread to the rear beyond the needle eye.

(9)

14

Page 17 Page 19
Page 18
Image 18
Smart Parts 100 s owner manual Threading the upper thread
Page 17 Page 19

100 s specifications

The Smart Parts 100S is a revolutionary paintball marker that has gained considerable attention in the paintball community for its innovative design and cutting-edge features. This marker is particularly aimed at competitive players who demand reliability, performance, and precision on the field.

One of the standout features of the Smart Parts 100S is its lightweight design. Weighing in at just under two pounds, this marker allows for greater mobility and agility, essential for fast-paced paintball matches. The minimalistic build doesn't compromise on durability; the body is crafted from high-quality aluminum, providing both strength and sturdiness while keeping the weight manageable.

Equipped with an electronic trigger system, the Smart Parts 100S offers players an adjustable rate of fire, allowing for a customizable shooting experience. The response is crisp and quick, which can be critical during high-pressure gameplay. Beyond the electronic trigger, the marker incorporates a user-friendly interface that allows players to easily switch between different firing modes, including semi-automatic, burst, and fully automatic settings.

In terms of technology, the 100S utilizes a spool valve system that delivers a smoother shot with reduced recoil. This advanced mechanism significantly enhances accuracy and consistency, letting players maintain tighter groupings when firing. The built-in adjustable regulator further improves performance by ensuring stable velocity, irrespective of changing atmospheric conditions.

The marker comes with a high-capacity, low-profile loader that minimizes the likelihood of jams and ensures that players can maximize their firing potential without frequent interruptions. Additionally, it features a micro-branch air input that increases air efficiency, allowing players to get more shots per tank fill.

Another notable characteristic of the Smart Parts 100S is its compatibility with a wide range of accessories, including various barrels and grips. This adaptability permits players to customize their setup to suit their playstyle, making it a versatile choice for both novices and seasoned veterans.

In conclusion, the Smart Parts 100S stands out as a top-tier paintball marker, blending lightweight design, advanced electronic features, and superior accuracy. For players looking to enhance their game, the 100S offers an impressive package that is hard to ignore.
Top Page Image Contents