10 | CHAPTER 2 – INSTALLING THE INTERACTIVE DISPLAY
• When using mounting accessories, they must comply with the VESA-compatible
(FDMlv1) mounting method.
• Use M6 screws of the appropriate length.
• The recommended fasten force is 470–635 N·cm. Mounting interfaces that
comply with the UL1678 standard in North America are recommended.
• Refer to the instructions included with the mounting equipment for detailed
information.
Consider the following when mounting the interactive display on a stand:
• Follow the instructions included with the stand or mounting apparatus. Use only
those devices recommended by the manufacturer.
• Install the interactive display carefully and avoid pinching your fingers.
• To ensure the interactive display doesn’t tip, fasten it to a wall using a cord or
chain. Ensure the wall and all fastening materials can support the weight of the
interactive display.