8Camfire DCi User's Guide
If you have multiple whiteboards, the following screen appears.
2. Select a whiteboard, if required.
3. Press Save.
Your notes are saved using the mode identified in the status area of the control unit
screen. A screen indicates when the image is being saved and another screen indicates
when it’s safe to erase the whiteboard. Wait until the Ready to Save screen appears
before you capture any new notes.
NOTE: The storage capacity for internal Web folders is limited (approximately 80–120
images), and the oldest folder is deleted automatically once you exceed this capacity. To
retain the notes stored in a Web folder, you must save them on your hard drive or
network as explained on page 22.
Activating/Deactivating the Statusboard Option at the Control Unit
By default, the system only saves your whiteboard notes when you press the Save button.
However, if you prefer, you can use the Statusboard option to automatically save your
whiteboard notes whenever you step away from the whiteboard or at regular time interval.
You can choose to archive each image or overwrite the previous image with a new one each
time your whiteboard notes are saved.
For example, suppose your company uses a whiteboard to keep track of customer orders
and your office is in a different room than the whiteboard. With the Statusboard option, you
can keep pace with the changes noted on the whiteboard without ever leaving your office.
NOTE: To use the Statusboard option, either Image-Saving Software for PCs or Image-
Saving Software for Networks must be active.
To activate the Statusboard option
1. Press the Options button on the control unit.
The Options screen appears.
2. Use the scroll button to select Statusboard and press OK.